home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload Trio 2
/
Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO
/
dir34
/
dos999.zip
/
2004.TXT
< prev
next >
Wrap
Text File
|
1993-04-01
|
2KB
|
60 lines
___________________________________________________________________________
STACKER NOTE STACKER NOTE
Title: Stacking the Hardrive on a Floppyless Notebook Computer
STAC FAX Index #2004 - 02/20/92
___________________________________________________________________________
Background.
This procedure is for Stacker 2.0 users with a single partition C: drive
and the ability to transfer files from a second "host" computer with
floppy drive, to the notebook.
Procedure.
1. Create a STACKER directory on the C: drive of the notebook.
2. Transfer the STACKER files from the host computer to the STACKER
directory on the notebook.
3. Edit the Autoexec.bat on the notebook's C drive and add ;C:\STACKER
to the path.
4. Change to the STACKER directory on the C: drive.
5. Type the following: INSTALL /=F <ENTER> This will personalize the
Stacker files. When you get to the point where install wants you to
insert a disk, escape out of install and exit.
6. Type the following: INSTALL <ENTER>
7. During install, you want to choose to "Build an empty Stacker drive"
The amount to use for the Stacker drive is 1 MB.
8. Reboot the notebook to mount the empty drive D.
9. Copy the Stacker files from C:\STACKER to D:\.
10. Type D:\Install <ENTER>.
11. Choose to "Stack an existing drive with its data".
12. Choose drive C:.
13. The Install program will reboot your computer after the
drive has been created. Change to C:\STACKER.
14. Type : SREMOVE D: <ENTER>
This will remove the temporary D: drive.
15. Edit the Config.sys on drive C: to remove the reference to
the temporary D drive. The line should read as follows:
DEVICE=C:\STACKER\STACKER.COM C:\STACVOL.DSK
16. Reboot. Your hardisk is now "Stacked."
___________________________________________________________________________
Copyright 1993, Stac Electronics